MEMS Protective Vent MV-S100
Install before the reflow process. It can be installed on the top of the upper sound hole microphone or the circuit board of bottom back of the lower sound hole microphone.
Order email
han.zhang09@china-venting.comApplication:
S100 for FPC assembly
Install before the reflow process. It can be installed on the top of the upper sound hole microphone or the circuit board of bottom back of the lower sound hole microphone.
| Factory | MicroVent |
| Model | MV-S100 |
| Characteristic | Acoustic, breathable |
| Air Permeability @ 70mbar（1.5 hole） | >8000 ml/min/cm2 |
| Inlet Pressure | @ 70mbar |
| Sound loss | <3dB |
| Thickness | 0.15 mm |
| Application Temperature | Max. 260℃ for 3 mins |
